Cooling agent extends service life of traction batteries
Lithium-ion batteries are quite sensitive to temperature variations. Their optimum temperature range is between 20 and 35°C. But already during a short summer ride the battery can heat up beyond this limit, potentially causing significant damage. If such a battery is operated at 45°C instead of 35°C, the service life will be reduced by 50%. For this reason, traction batteries require a temperature management. Today's batteries are either not cooled at all - with the abovementioned consequences. Or they are cooled by air, which however is not regarded as a satisfying solution. Air has a low thermal capacity and is a poor thermal conductor. In addition, the battery cells need a relatively large distance between each other to enable the designers to implement air conducts.
Researchers from the Fraunhofer Institute for environmental, safety and energy technology (UMSICHT) in Oberhausen (Germany) have developed a cooling agent with excellent properties to cool batteries. CryoSolplus is a dispersion, consisting of water, paraffin, stabilizing surfactants and small quantities of the antifreeze agent glycol. Since its thermal capacity is three times higher than water, the storage tank can be much smaller than the tank of a water-cooled system with comparable performance. In addition, CrySolplus features good thermal conduction; the heat can be transported away from the battery calls quickly. The additional costs are moderate; according to UMSICHT they amount to some 50 to 100 euros per vehicle.
The cooling agent functions as follows: As CryoSolplus absorbs heat, the paraffin globules melt - they become drops and store the heat. As soon as the solution cools off, the globules solidify again. Thus, the effect of CryoSolplus is based on a phase change. "The challenge was to get the dispersion stable enough", said UMSICHT scientist Tobias Kappels. The globules must not clump and, since they are lighter than water, they must not concentrate at the surface. This is why the researchers added surfactants: They accumulate at the globules and thus form a protecting cover.
The next research step will be to equip a test vehicle with the new cooling agent.
- Nanomaterial-packed cathode extends range of EV lithium-sulfur batteries
- Battery sensor integrates MCU, CAN and analogue front-end
- Li-ion batteries for EVs to surpass $26n by 2023
- Tesla car battery fires caused by road debris damage
- Fraunhofer, Johnson Controls develop battery cooling solutions
- Reference design cuts costs of lithium e-bike batteries
- Smart vibration damping improves comfort, reduces weight
- Micro smart grid plugs renewables into EV fleets
- Why Japan leads in electromobility - and why this could change soon
- Newswatch: Tesla sketches out roadmap for the future?
- Tesla reveals USD5bn lithium-ion battery 'Gigafactory' manufacturing plans
- Current sensor offers energy control to future-proof EVs/HEVs
- Bosch returns to traction battery business with new JV
- Hydrogen battery aims to replace lithium counter-parts
- Is the battery you sell or specify, a potential safety hazard?
- Audi TT - a step towards the software-defined car
- Land Rover makes front part of vehicle 'invisible'
- EU agrees on charging plug for electric cars
- Higher supply voltage, better mileage: Continental, Schaeffler show how
- Continental acquires British engineering partner Zytek
- Porsche connects infotainment to cloud with HTML5
- Electric powertrain does away with rare earth metals
- Parrot sues Audi subsidiary over lost project
- Continental cranks up radar sensor production
- BMW updates navigation maps via mobile radio connection
- Ice warning from the cloud
- University of Parma refines autonomous driving
- Traffic flow: Cooperative systems beat driver assistance
- Freescale, Broadcom bring surround view to automotive mainstream
- Renault cockpit woos the connected lifestyle
- Supplying DC input power for HEV testing
- NSR Noise Suppressors: Wirewound Resistors
- Virtual Hardware “In-the-Loop”: Earlier Testing for Automotive Applications
- Open Standards and Product Differentiation
- Camera Solutions with Micrel Power Management and Networking
- Deterministic Real-Time Ethernet Platform
- Using Ethernet Applications to Optimize Automotive Electronics Platforms