Hall-effect current sensor IC is optimised for 3.3 V operation at high temperatures
The device consists of a precision, low-offset linear Hall sensor circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage.
Device accuracy is optimised through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilised BiCMOS Hall IC, which is programmed for accuracy at the factory.
High-level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, guarantees low ripple at the output and low-offset drift in high-side high-voltage applications. The output of the device has a positive slope when an increasing current flows through the primary copper conduction path used for current sensing.
The internal resistance of this conductive path is typically 100 microhms, providing low power loss. The thickness of the copper conductor allows for 200 A continuous current sensing applications and survival to much higher transient currents.
The terminals of the conductive path are electrically isolated from the sensor leads, allowing the ACS759 family of sensors to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques. The device is fully calibrated prior to shipment from the factory.
Typical applications include motor control, load detection and management, power supply and DC/DC converter control, inverter control, and overcurrent fault detection.
The ACS759 sensor IC is lead (Pb) free. All leads are plated with 100% matt tin, and there is no lead inside the package. The heavy-gauge leadframe is made of oxygen-free copper. The device is available in a small 5-pin CB package with easy mounting capability.
Please click here to download a copy of the data sheet: http://www.allegromicro.com/en/Products/Current-Sensor-ICs/Fifty-To-Two-Hundred-Amp-Integrated-Conductor-Sensor-ICs/ACS759.aspx
- Pre-driver chip targets automotive high-current motor applications
- CMOS image sensors offer VGA for surveillance cameras and drive recorders
- Smart sensors offer haptic feedback
- Micro sensor monitors conditions of lubricants
- Wheel-speed sensor IC features integrated capacitor
- MOSFET driver chip replaces relays in safety-critical applications
- Stage win for ams against Melexis in patent claim
- Hall effect switch does away with mechanical adjustments
- Power infotainment systems with automotive buck regulator
- Hall effect sensor meets ISO 26262 safety standards
- Differential speed and directional sensor IC offers dual output
- Battery sensor integrates MCU, CAN and analogue front-end
- University of Parma refines autonomous driving
- Hall-effect sensor targets tachometer applications
- Continental cranks up radar sensor production
- Audi makes the leap to 48V supply
- Continental goes Silicon Valley, grabs Google guru
- In-vehicle infotainment steps up to USB3, adds wireless charging
- Dutch startup shrinks 60GHz radars, increases precision
- Infineon closes technology gap through International Rectifier takeover
- Tools out of the 3D printer conquer car production
- Vehicle-to-Vehicle: snapshot of the NHTSA report
- Intelligent bicycle gets connected
- Study: Connected Car to spur competition between OEMs and IT players
- Volvo opens proving ground for next-gen car technology
- Automotive/industrial buck controller maintains efficiency at high conversion ratios
- Wireless charging reference design targets smartphones in cars
- Voltage regulators connect directly to car battery
- EV battery electrochemical reaction revealed by Nanoscale study
- Schaeffler to boost electromobility by Formula E commitment
- Making cars safer through technology innovation
- Supplying DC input power for HEV testing
- NSR Noise Suppressors: Wirewound Resistors
- Virtual Hardware “In-the-Loop”: Earlier Testing for Automotive Applications
- Open Standards and Product Differentiation
- Camera Solutions with Micrel Power Management and Networking
- Deterministic Real-Time Ethernet Platform