TI continues NatSemi Simple Switcher product line with nano modules and nano regulators
The 1-A LMZ10501 and 650-mA LMZ10500 nano modules feature on-chip inductor and 2-A LMR24220 and 1-A LMR24210 nano regulators feature high performance and tiny, nano packaging as small as 7.5-mm2. Used in conjunction with the Webench online design tool, the products simplify and speed the design process
In a typical space-constrained design, TI's new nano power modules, which support an input voltage range of 2.7 V to 5.5 V, can be designed alongside the nano power regulators to step down from an intermediate voltage rail to the point of load, providing a complete power management solution in applications with space and height limitations.
The Simple Switcher power modules, developed by recently-acquired National Semiconductor, expand TI's portfolio of integrated power solutions, comply with the CISPR 22 Class B radiated and conducted electromagnetic interference (EMI) standard for communications applications. The new nano modules also meet the CISPR 25, Class 5 radiated noise emissions standard for automotive applications. For portable applications TI also offers the 600-mA TPS82671 in a fully integrated 6.7-mm2 MicroSiP package.
The new nano power modules and regulators are available in volume now from TI and its authorized distributors. The nano power modules are offered in an 8-pin leadless surface mount package measuring 2.5 mm by 3 mm by 1.2 mm. The suggested retail price of the LMZ10501 is $1.80 and the LMZ10500 is $1.30 in 1,000-unit quantities.
The nano power regulators are offered in a 28-pin micro SMD package measuring 2.45 mm by 3.64 mm by 0.60 mm. The suggested retail price of the LMR24220 is $2.00 and the LMR24210 is $1.50 in 1,000-unit quantities.
For more information on TI’s Simple Switcher product portfolio, visit www.ti.com/switcher.
- Single IC controls entire LED matrix headlight
- Voltage regulators connect directly to car battery
- In-vehicle infotainment steps up to USB3, adds wireless charging
- Top ten automotive MEMS sensor vendors ranked
- Analog front end improves radar image
- Jacinto 6 'Eco' brings high-end infotainment features to entry segment
- Multi-cell battery monitors scan 12 to 48-V industrial Li-ion batteries
- LED driver offers enhanced functionality for front and rear light
- Gate drivers offer ultra-low propagation delay
- Tool set speeds development of camera-based driver assistance systems
- The MEMS market - who are the winners, the losers
- TI rolls heterogeneous number crunching SoC for automotive video processing
- Inductance-to-digital converter: a new approach in position and motion sensing
- Fast CAN transceivers with integrated ESD protection for vehicle body networks
- Tiva development kit supports USB, CAN interfaces
- Virtual car key, Lidar sensors and more: Valeo flexes its muscles
- LA Auto Show: Hydrogen fuel cell drive is back
- Noise cancellation: The sounds of silence in the car
- Researchers unlock potential of phased-array radar for automotive deployment
- Consumer chips in the car? Experts demand adequate design processes
- Renesas shifts automotive centre of gravity to Europe
- Advanced lead-carbon batteries could enable 48V super hybrid vehicles
- Sensor package saves cost, meets ASIL D
- NXP extends NFC ecosystem to the car
- Vehicle-to-X technology: 1.300 km drive starts at electronica
- Bosch brings electronic fuel system, connectivity to Asian motorbikes
- Eye-tracking, the next wave in HMI design?
- Freescale extends development environment for in-vehicle Ethernet
- Pixel chip sparks energy-efficient intelligent LED headlamps
- Spansion CEO: "Quality happens at the system level"
- Making cars safer through technology innovation
- Supplying DC input power for HEV testing
- NSR Noise Suppressors: Wirewound Resistors
- Virtual Hardware “In-the-Loop”: Earlier Testing for Automotive Applications
- Open Standards and Product Differentiation
- Camera Solutions with Micrel Power Management and Networking
- Deterministic Real-Time Ethernet Platform