Valeo makes your car engine hybrid
Interviewed by French radio station Europe 1, Henri Trintignac, Valeo's director of Electric Vehicle Activity, claimed that Valeo SA has developed an electrification solution for the powertrain, Hybrid4All, which enables car manufacturers to turn a traditional engine – diesel or gasoline - into a hybrid engine, at an affordable price by using simple and standardized components.
Valeo claimed the “Hybrid4all” architecture is based on a compact motor generator which uses a low voltage electrical system (48V). Costs are thus reduced, making this solution more acceptable for the mass market.
In the “Hybrid4all” architecture, the electric motor, which assists the ICE, can be installed in different positions: in front of the ICE (on the accessory drive belt), after the gear-box or between the two. This solution integrates Valeo's enhanced Stop-Start, regenerative braking and torque assist functions.
The system is claimed to enable fuel savings of more than 15 percent on an average gasoline engine vehicle. The original “Hybrid4all” electro-technical architecture means that the motor generator provides a high level of power (up to 15kW) and takes up no more room than a conventional alternator.
Valeo said "Hybrid4all" recovers energy during deceleration (regenerative braking), and re-uses it during acceleration assisting the combustion engine.
"This system enables to reduce CO2 emissions by 15 percent," told Trintignac to Europe 1. A car driver now spending 100 euros ($120) per month will see his/her fuel budget drop to 85 euros ($102), he continued.
Valeo claimed a 15.5-percent CO2 reduction with a prototype car, a Peugeot 207 1.6 L THP. The system is designed for small cars such as the Renault Twingo, Clio and Opel Corsa. So far, these car models could not be equipped with hybrid engines because of the cost.
Cars equipped with the electrical system are expected to be available in 2017, Trintignac concluded.
Article by courtesy of EE Times
- Valeo utilizes LeddarTech sensing technology for next-gen ADAS
- Fujitsu Ten and Valeo join forces for automotive safety systems
- Valeo swallows Norwegian electromobility company
- Valeo acquires electric supercharger technology
- Valeo inaugurates electronics development center in China
- Valeo equips wiper system with synchronous motor direct drive
- EE Times' annual salary & opinion survey report
- Infineon's secret weapon: Dresden Fab, 48V car battery
- Daimler to test autonomous driving in California
- BMW connects car through Smartwatch app
- Study challenges Tesla's Gigafactory figures, predicts battery overcapacity
- Structural electronics - the next big thing in smart cars?
- LTE successfully tested in V2X scenario
- Radar-based blind spot assist to eliminate collisions during turning
- Smartphone integration shifts automotive processor demand
- Lithium ion batteries: new materials multiply charging capability
- ZF swallows TRW Automotive to form world's second largest supplier
- Centralised architecture: Apps as driver assistant systems
- Battery-pack controller manages 14-cell lithium ion sources to ASIL-C
- App looks into vehicle electronics
- Safety package protects small electric vehicles
- Making cars safer through technology innovation
- Supplying DC input power for HEV testing
- NSR Noise Suppressors: Wirewound Resistors
- Virtual Hardware “In-the-Loop”: Earlier Testing for Automotive Applications
- Open Standards and Product Differentiation
- Camera Solutions with Micrel Power Management and Networking
- Deterministic Real-Time Ethernet Platform