4-channel data acquisition IC targets vehicle radar systems

February 16, 2015 // By Graham Prophet
Analog Devices has posted details of the ADAR7251, a 4-channel, 16-bit, simultaneous sampling data-acquisition system designed for automotive radar systems.

Each of the four channels contains a low-noise amplifier (LNA), a programmable-gain amplifier (PGA), an equaliser, a multibit signma-delta (Σ-Δ) ADC, and a decimation filter. The front-end circuitry allows direct connection to microwave mixer output with few external passive components, eliminating the need for a high-order antialiasing filter, driver op amps, and bipolar supplies, and providing precise channel-to-channel drift matching.

The on-chip phase-locked loop (PLL) allows a range of clock frequencies for system flexibility. The ADC can be synchronised with an external ramp for FSK-FMCW radar applications. It supports serial and parallel interfaces at programmable sample rates from 300 ksamples/sec to 1.8 Msmples/sec, as well as simple connections to digital signal processors and microcontrollers.

Operating on 1.8-V and 3.3-V supplies, the ADAR7251 dissipates 400 mW at 1.2 Msamples/sec and 5 mW in power-down mode. Available in a 48-lead LFCSP package, it is specified from –40°C to +125°C and priced at $9.00 (1000).

Analog Devices; www.analog.com/en/analog-to-digital-converters/ad-converters/adar7251/products/product.html