Rugged ECU targets construction and agricultural machines

November 08, 2013 // By Julien Happich
TTControl's HY-TTC 500 electronic control units feature freely programmable controllers with a high performance dual-core ARM Cortex-R4 lockstep processor, they are designed for use in demanding safety-critical mobile applications and protected by a compact, automotive-style housing suited for harsh environments.
The controllers fulfill safety requirements up to SIL 2 (IEC 61508) / PL d (ISO 13849) and can be programmed either in C or in CODESYS. The safety certified CODESYS Safety SIL 2 speeds up application validation significantly.

The majority of run-time tests that is needed to achieve the diagnostic coverage required for SIL 2 / PL d is performed in hardware by the dual-core lockstep CPU and its safety companion. Therefore almost the full processor power is available for the application. The available memory protection mechanisms allows to execute safety and non-safety software on the same ECU without interference. The time-consuming validation of non-safe software is therefore no longer necessary. Safe data communication is achieved by the standardized CANopen Safety protocol. In case of safety-relevant failure outputs can be shut-off in 3 groups allowing limp-home functionality.
The extensive I/O set with various configuration options makes the HY-TTC 500 controllers suitable for a wide range of high-end applications: for example, a group of 8 I/O pins can be individually configured for use as voltage output, digital output or analogue input. Commissioning time can be improved by using Ethernet for download and debugging purposes.


Visit TTControl at www.ttcontrol.com